PoL (Power over Link) Products Solve your Cabling and Power Problems
Overview
Have you ever needed to connect an IP camera, controller, radio or other device to an Ethernet network but the distance is just a bit too long and you don’t have a way to power the device where it is located? EtherWAN has solved this dilemma.ED3638 is a set of Hardened 10/100BASE-TX PoL/PoE Ethernet Extender that could extend both power and Ethernet over coaxial cable. The typical PoE standard supports data and power transmitting only up to 100 meters over Ethernet cable, but with ED3638, you don’t have to change your cable and worry about the distance anymore.
Power and Ethernet Data are transmitted over coaxial cable up to 1.8 Km (5905 ft.) 100Mbps transmission rate and 30W PoE up to 400 meters (1312ft) Supports IEEE802.3at and IEEE802.af Power over Ethernet (PoE) solution 2KV surge protection on PoL -40°C to 75°C (-40°F to 167°F) Wide operating temperature
Two Performance types for various environment by a simple dip-switch configuration
Perf (Performance): Better line speed
Std (Standard): Better noise immunity
Bandwidth indicators for data performance evaluation PoE indicators for monitoring the power output capacity
Hardened 10/100BASE-TX PoL™/PoE Ethernet Extender over Coaxial Cable
Field-proven Reliability
Hardened Ethernet equipment with superior reliability, long MBTF, redundant power support, wide operating temperature range, EDI, EMI, RFI and surge protection.
Full Product Testing
Our hardened products are required to pass stringent real-time data transfer testing at the temperature from -40° to +85°C for up to 72 hours without compromise.
Customer-centered Services
EtherWAN has a professional support crew, with domain know-how and hands-on experience working with system integrators and solution providers.
If you do not want to receive this e-bulletin in the future, please reply here