EDGE 2

Flexible Connectivity for Critical Applications

• • Multiple I/O to connect to a Wide Variety of Field Equipment
  • Over thousands data storage (16MB Log storage); Scheduled Uplink
  • Integrated 10 bit A/D Converter to convert Analog Signal to Digital Data

Rugged Industrial Design

• • IP67 Enclosure Design
  • -30 to 70°C Temperature Range
  • Battery or DC Power Input

Reliable and Uninterrupted Connection

• • Serial port supports Modbus RTU Interoperability
  • Remote Control when VDC powered (DO output and Modbus Control)
  • Wake up trigger with sensor data continuing uplink
  • Smart alert with over threshold trigger DO and MQTT event activate

IoT Cloud Connectivity

• • MQTT Protocol for Cloud Connectivity
  • Ready to Cloud for AWS and Azure

WAN & Uplink

• EDGE 2
  • Protocol: TCP, UDP, MQTT
  • Cloud: AWS, Azure and MQTT based cloud
  • Data Security: SSL TLS 1.2
  • Connection: By schedule plan
    (per Yearly/Monthly/Weekly/Daily/Hourly or per designated Minutes)
  • Data Upload: Multiple servers supported for redundancy,
    re-trial plan for interrupted connection

Field Communication

• Modbus
  • Master for accessing attached Modbus RTU Slaves
    (Up to 8 Modbus devices supported)
• Data Logging
  • By schedule plan
    (per Yearly/Monthly/Weekly/Daily/Hourly or per designated Minutes)

Administration

• Configuration
  • Windows Utility, Console CLI, USB-to-Serial console cable
• System
  • Backup & Restore, Reboot & Reset, Syslog, Upgrade

Wireless Interfaces

• EDGE 2
  • 1 x LTE Cat. M1/NB2 Module
    3GPP, Cat. M1/NB2 with PSM (*Power save mode) supported

• Data Transmission
  • Cat. M1: Max. 375Kbps (DL); Max. 375Kbps (UL)
    Cat. NB2: Max. 32Kbps (DL); Max. 70Kbps (UL)

• Specification
  • Max. Output Power: 23dBm
    Sensitivity:
      -107dBm@Cat M1, 1.4MHz Bandwidth, CE Mode A
      -113dBm@Cat NB2, CE Level 0

Log Storage

• Data logging (EDGE 2)
  • 16MB Internal Storage

Power

• 4000mAh 3.6V Li-SOCL2 battery (Optional), or external 5-12VDC Power Input predefined by Jumper
• Power Consumption:
  • Fully Operation: 1000 mW (3.6Volts)
  • Sleepn: 0.4mW (3.6 Volts)
  • Sending: 11.25mW (tx 45 seconds/hour, 3.6 volts)

I/O Interfaces

• Analog Input
  • 3 x AI ports (supports 0-10V/4-20mA)
    Conversion: 10bit ADC
    Input Range: 0-10V, or 4-20mA (Dual mode)
    Resolution: 10mV, or 20uA (with 2-bit hard-wired divider involved)
• Digital Input
  • 2 x DI ports (Isolated, supports Pulse Counter, Dry Contact)
• Digital Output
  • 1 x DO port (Isolated, Non-Relayed Output, Maximum 24V/300mA)
• Wake-up Port
  • 1 x Internal Reed Switch (EDGE 2) and dedicated wake-up port reserved for device wake-up triggering
• RS-485
  • Support 8 sets Modbus RTU devices
    Modbus/RTU read command FC 1,2,3,4 and write command FC 5,6 from MQTT or LoRaWAN

I/O Connectors

• 2 x M16 waterproof connectors with 2-hole cable gland for wiring the required ports to external sensors/meters

Mechanical

• Casing
  • Plastic (PC, UL-94V2)
    IP67
• Dimension
  • 105 x 55 x 76.47mm (W x D x H); Enclosure only
    131.97 x 81 x 76.47mm (W x D x H); Including Cable Gland, Brackets
• Weight
  • 0.3Kg (0.66lbs)
• Installation
  • Bracket mounting

Environment Limits

• Operating Temperature
  • -30 to 70°C (-22 to 158°F)
• Storage Temperature
  • -40 to 85°C (-40 to 185°F)
• Ambient Relative Humidity
  • 5% to 95% (non-condensing)

Embedded Antennas

• EDGE 2 Series
  • 1 x Internal 2dBi Antenna

Regulatory Approvals

• Safety
  • EN 60950-1
• Emissions/Immunity
  • CE/NCC/EAC