EX65000 Managed Industrial 8-port Gigabit Ethernet Switch| Products

The 8-port Industrial Managed Gigabit Ethernet Switch EX65000 series is designed to operate in industrial environments. Whether on the factory floor or the control room, the EX65000 will provide
flawless communications when you most need it. The EX65000 is with eight Gigabit Ethernet ports that may be configured in various combinations of copper and fiber optic interfaces. Fully manageable via SNMP, Web Browser, Telnet or Console port, users may choose among SNMP/RMON, Web Browser, or Telnet for remote monitoring and configuration. The Hardened EX65000 series supports advanced features such as IEEE802.1Q VLAN, IEEE802.3ad Link Aggregation Trunking, IP Multicast IGMP Snooping, Multiple Spanning Tree for Redundancy, QoS for priority queuing, and port mirroring. It also supports rate control which allows users to set the maximum bandwidth on each port individually.

Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
IEEE802.1s MSTP, IEEE802.1w RSTP, and IEEE802.1D STP compatible
EtherWAN proprietary "α-ring" support for network redundancy; recovery time <15ms
IP Multicast Filtering through IGMP Snooping
Supports port-based VLAN and IEEE802.1Q VLAN Tagging and GVRP
IEEE802.1p QOS with four priority queues
IEEE802.3ad Link Aggregation and MAC-based trunking with automatic link fail-over
RS-232 console, Telnet, SSL/SSH, SNMP V1 & V2c & V3, RMON,Web Browser, and TFTP Management
Supports Command Line Interface in RS-232 Console
Bandwidth Rate Control
Per-port programmable MAC address locking
Port mirroring
1000Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
Full wire-speed forwarding rate
Alarms for power failure by relay output
Redundant Power inputs with Terminal Block and DC Jack
-20°C to 60°C (-4°F to 140°F) operating temperature range
Supports NTP

Technology

Standards: IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX/100BASE-FX,
IEEE802.3ab 1000BASE-T, IEEE802.3z 1000BASE-SX/
1000BASE-LX, IEEE802.3x, IEEE802.1Q, IEEE802.1p,
IEEE802.1s, IEEE802.1w, IEEE802.1D

Forward and Filtering Rate: 14,880pps for 10Mbps
148,810pps for 100Mbps
1,488,100pps for 1000Mbps

Packet Buffer Memory: 1M bits

Processing Type: Store-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex flow control

Address Table Size: 4096 MAC addresses

Power

Input: Input Voltage: 12 to 32VDC (Terminal Block); 12VDC (DC Jack)

Power Consumption: 22W Max. 1.83A@12VDC, 0.92A@24VDC

Overload Current Protection: Present

Reverse Polarity Protection: Present

Mechanical

Casing: Aluminum case
IP30

Dimensions: 60mm (W) x 125mm (D) x 145mm (H)
(2.36” (W) x 4.92” (D) x 5.71” (H))

Weight: 1.1Kg (2.42lbs.)

Installation: DIN-Rail (Top hat type 35mm), Panel Mounting

Interface

Ethernet Port: 10/100/1000BASE-TX: 8, 7, or 6 ports
1000BASE-SX/LX: 0, 1, or 2 ports

Console Port: Port: One DB9 RS-232 port

LED Indicators: Per Unit: Power Status (Power 1, Power 2, Power 3), Reset, Alarm
Per Port:Link/Activity, Speed

Alarm Contact: One relay output with current 1A@24VDC

Environment

Operating Temperature: -20°C to 60°C (-4°F to 140°F)
Tested @ -30°C to 70°C( -22°F to 158°F)

Storage Temperature: -40°C to 85°C (-40°F to 185°F)
Ambient Relative Humidity:
5% to 95% (non-condensing)

Regulatory Approvals:

ISO: Manufactured in an ISO9001 facility

Safety: UL508

EMI: FCC Part 15, Class A
EN61000-6-4
EN55022
EN61000-3-2
EN61000-3-3

EMS: EN61000-6-2
EN61000-4-2 (ESD Standards)
Contact: + / - 6KV; Criteria B
Air: + / - 8KV; Criteria B
EN61000-4-3 (Radiated RFI Standards)
10V/m, 80 to 1000MHz; 80% AM Criteria A
EN61000-4-4 (Burst Standards)
Signal Ports: + / - 4KV; Criteria B
D.C. Power Ports: + / - 4KV; Criteria B
EN61000-4-5 (Surge Standards)
Signal Ports: + / - 1KV; Line-to-Line; Criteria B
D.C. Power Ports: + / - 0.5KV; Line-to-earth; Criteria B
EN61000-4-6 (Induced RFI Standards)
Signal Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
D.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
EN61000-4-8 (Magnetic Field Standards)
30A/m @ 50, 60Hz; Criteria A

Environmental Test Compliance: IEC60068-2-6 Fc (Vibration Resistance)
5g @ 10~150Hz, Amplitude 0.35mm (Operation/Storage/Transport)
IEC60068-2-27 Ea (Shock)
25g @ 11ms (Half-Sine Shock Pulse; Operation)
50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport)
IEC60068-2-32 Ed (Free Fall)
1M (3.281ft.)

EX65080-00Z
8-Port 10/100/1000BASE-TX Industrial Managed Ethernet Switch

EX65071-0YZ
7-Port 10/100/1000BASE-TX + 1-Port Gigabit Industrial Managed Ethernet Switch

EX65062-0YZ
6-Port 10/100/1000BASE-TX + 2-Port Gigabit Industrial Managed Ethernet Switch

Gigabit Options:
(Y) =3:1000BASE-SX (SC)
A:1000BASE-LX (SC) –10Km
B:1000BASE-LX (SC) –20Km
R:1000BASE-BX (SC) WDM –TX:1310nm/RX:1550nm –20Km
S:1000BASE-BX (SC) WDM –TX:1550nm/RX:1310nm –20Km

Power Input Interface:
(Z) =B : DC Jack & Terminal Block

Power Supply: (Optional)
*Options A - Terminal Block power supply(s), part numbers: DR-30-24, DR-60-24, DR-75-24, DR-120-24 or 41-136046-X X=1,2,3,4,5
**Options B - DC Jack power supplies kit(s), part numbers: 41-136044-X X=1,2,3,4,5

Installation Type:
DIN Rail (mounting kit is included), Optional Panel Mount kits are available for ordering.

[Building Automation]

Building Automation